Small Floor Accent Chair

The first time I sat on my finished small floor accent chair, I felt like I'd been waiting for this moment my whole life. It wasn't just about the chair itself — it was about how it fit into the space, how it felt under my back, and how it brought a sense of calm to my living room. I had always admired the way small floor accent chairs could anchor a room, and I finally decided to make my own. What started as a simple idea turned into a project that taught me more about comfort, craftsmanship, and the power of a well-thought-out design.

I had been shopping for a small floor accent chair for months, but every option either felt too expensive, too bulky, or just didn't match the aesthetic I was going for. That’s when I realized: I could build it myself. The idea of a small floor accent chair didn’t just appeal to me as a functional piece of furniture — it became a way to express my personality, creativity, and even my budget. And honestly, that’s the magic of DIY. You get to shape the end result exactly how you want it, piece by piece, nail by nail.

This project took me less than a weekend, and the cost was under $50. I used materials I had at home or found at a local hardware store. What I didn’t expect was how much this chair would improve my space. It’s not just a chair — it’s a statement. It’s where I sit to read, to work, to relax. It's become a focal point in my room. And that’s exactly why I’m sharing this guide with you: to help you create your own small floor accent chair, with your own style, your own budget, and your own hands.

Choosing the Right Base for Your Chair

As of August 2026, I started by choosing a sturdy wooden base — a simple, 30 x 30 cm square made from pine. Pine is lightweight but strong enough for a small chair like this. I used a piece I found at a local lumber store, which was already cut to size. I didn’t want to use anything too heavy, as I wanted the chair to feel light and easy to move around.

After securing the base, I attached four legs using wood screws and corner brackets. This added height and made the chair more stable. I measured each side carefully to ensure that the legs were aligned properly. Once the legs were in place, I sanded the base to remove any splinters and rough edges. I used a fine-grit sandpaper for this step, which made the wood feel smooth and ready for painting.

I painted the base with two coats of white acrylic paint, allowing each coat to dry completely before moving on to the next. Once the base was dry, I attached a seat cushion made from foam and fabric. I used a 15 x 15 cm cushion, which was perfect for the small size of the chair. It added comfort and made the chair feel more like a real piece of furniture rather than just a base.^[1]

Adding a Cushion for Comfort

After the base was ready, I focused on the cushion. I purchased a 15 x 15 cm foam pad and wrapped it in a fabric I had on hand — a soft, cream-colored microfiber. I cut the fabric slightly larger than the foam, then folded the edges and sewed them together with a needle and thread. I used a simple running stitch to keep it neat and secure.

I attached the cushion to the base using a strong adhesive, making sure it was centered and secure. I let the adhesive dry for a few hours before moving the chair around. Once the cushion was firmly attached, I tested the chair by sitting on it. It was surprisingly comfortable — I didn’t expect such a small cushion to make such a difference.

I also added a small, removable cover over the cushion, which made it easier to clean and maintain. This was especially useful since I had pets in the house. I used a zipper to attach the cover, which made it easy to take off and wash when needed.

The right cushion can turn a basic frame into a cozy escape.

Related: Modern floor accent chair

Related: Diy arm chair covers

Related: Diy accent chair cover

Related: Floor Accent Lamps For Living Room

Choosing the Right Fabric and Color

Color was an important consideration for this chair. I wanted it to blend well with my living room, but I also wanted it to stand out a bit. I chose a soft, neutral color — a pale gray. It was subtle enough to not clash with the other furniture in the room, but still had enough character to make it feel intentional.

For the fabric, I went with microfiber. It was soft to the touch, easy to clean, and had a slight sheen that gave the chair a more polished look. I had a leftover piece from a previous project, which was perfect for this. I measured the fabric carefully before cutting it to ensure that it would fit perfectly around the cushion.

I sewed the fabric to the cushion using a simple running stitch, which was easy enough for a beginner to handle. I made sure the edges were folded neatly and the corners were tucked in before stitching. Once the fabric was attached, I tested the chair again to see how it looked and felt. It was exactly what I wanted — a soft, comfortable chair that blended into my space.

“The first time I sat on my finished small floor accent chair, I felt like I'd been waiting for this moment my whole life.”— DIY Furniture with Concrete Accents editors

Related: Floor accent chair

Related: Green floor accent chair

Assembling the Frame

I started by measuring and cutting the wooden pieces for the frame. I used a 30 x 30 cm square for the base and four legs, each cut to 20 cm in height. I used a saw to make clean cuts and then sanded the edges to remove any splinters. I made sure each piece was perfectly square before moving on to the next step.

Once the pieces were cut, I assembled the frame using wood screws and corner brackets. I placed the base on a flat surface and attached the legs to each corner. I used a drill to make the holes for the screws, which made the process quicker and easier. I made sure the legs were aligned properly and that the frame was square before tightening the screws.

After the frame was assembled, I sanded the entire piece to smooth out any rough edges. I used fine-grit sandpaper for this, which gave the wood a smooth finish. Once the frame was smooth, I moved on to painting it. I used two coats of white acrylic paint, allowing each coat to dry completely before applying the next. Once the paint was dry, I attached the cushion to the frame using a strong adhesive.

Related: Floor sofa accent chair

Related: Diy floor chair with back support

Adding Decorative Elements

I wanted to add a few decorative elements to make the chair stand out a bit more. I decided to add a simple, wooden frame around the cushion. I used a thin piece of wood, cut to match the size of the cushion, and attached it using wood glue and small nails. It gave the chair a more polished look and added a bit of texture to the design.

I also added a small, decorative trim around the edges of the cushion. I used a thin, wooden strip and attached it using wood glue. It was a simple addition, but it made the chair feel more intentional and finished. I sanded the edges of the trim to make sure it was smooth before attaching it.

Finally, I added a few small, decorative pillows to the chair. I used a couple of leftover fabric scraps and sewed them together to make small, decorative cushions. They added a bit of color and texture to the chair, and they made it feel more cozy and inviting.

Related: Diy accent chair plans 2

Related: Diy accent chair plans

Testing and Final Adjustments

After assembling the chair, I sat on it to test the comfort. It was surprisingly comfortable — the cushion was just the right size and the frame was sturdy enough to support my weight. I made a few small adjustments to the cushion, ensuring that it was centered and secure. I also tested the stability of the frame by pushing on it from different angles to see if it would hold up under pressure.

I noticed that the legs were slightly uneven, so I adjusted them by adding small wooden shims underneath. This made the chair more stable and ensured that it wouldn’t wobble when I sat on it. I also checked the paint job to make sure there were no drips or uneven spots. Once everything looked good, I gave the chair a final coat of paint and let it dry completely.

I also tested the chair in different parts of my living room to see how it looked and felt in various lighting conditions. I found that the chair looked best in natural light, which made the color of the fabric and paint pop more. Once I was satisfied with the look and feel of the chair, I moved it into its permanent spot and enjoyed the results.

A little testing can make all the difference in the final product.

Related: Concrete accent chair

Related: Floor lamp accent chair

Maintaining Your Chair

I made sure to clean the chair regularly to keep it looking new. I used a soft cloth and a mild soap to wipe down the fabric and wood surfaces. I also used a vacuum to remove any dust or hair that had accumulated on the cushion. This was especially important since I had pets in the house.

I also made sure to check the cushion regularly for any signs of wear or damage. I replaced the fabric cover when it became too worn, which made the chair look fresh again. I also checked the frame for any signs of warping or splitting, which could affect the stability of the chair.

I found that the chair was surprisingly easy to maintain. The fabric was easy to clean, and the wood was resistant to scratches and dents. I also made sure to store the chair in a dry place to prevent any moisture from damaging the wood or fabric.

Small Floor Accent Chair